Chassis


- TOS/TAS Sensor
- Evaluates the signals outputted via communication while applying rotation or torque from outside to the TOS/TAS product.
- Applied source voltage
- Mechanically controls applied rotation and torque
- Judgment on SENT communication signals
- PWM communication signals

- EPB
- Evaluation of comprehensive functions and performances for EPB
- Measures RR and RL motor drive by CAN control.
- Measurement of RR, RL Motor drive by Clutch Sensor input.
- Measurement of RR, RL Motor drive by various switch inputs.
- BAT Current measurement.

- YAW-G Sensor
- Evaluation of comprehensive functions and performances for Yaw & G Sensor
- Uses structures that may generate Yaw Rate values to create the state change, which leads to a change in sensor values. Then measure the change in sensor values via CAN communication.
- GUses structures that may generate G values to create state change, which leads to a change in sensor values. Then measure the change in sensor

- ABS/ESC
- Evaluation of comprehensive functions and performances for Yaw & G Sensor
- Evaluation of comprehensive functions and performances for ABS & ESC
- Measures pump motor drive by CAN control
- Measures pump motor drive by external input
- ECU Error Code check by external input.
- Output measurement by Wheel Speed Sensor input.
- Current measurement of the ECU.

- IMEB
- IMEB(Integrated Mobis Electronic Brake): It is a device that enables vehicles to be decelerated/stopped/parked. ECU has braking capabilities for eco-friendly vehicles and automatic driving that realizes TCS, ESC, EMB regenerative braking functions as well as ABS.
- - Power test
- Wakeup test
- BLS Test
- Pedal Sensor Test
- Motor Sensor Test
- Pressure Sensor Test
- WSS Sensor Test
- HPM operation Test
- Valve driver Test
- ESS / EPB Test

- MDPS/Power Pack
- It is a device that controls the motor, receiving the torque signals from a driver's steering operation and the running speed of the vehicle, determining the motor torque that a motor would assist, and generating it.
- Evaluation of comprehensive functions and performances for MDPS
- - Measures motor drive by the CAN communication control
- Evaluation of motor performance by the SENT communication control
- Evaluation of torque performance through load control
- Torque FFT Evaluation
- Evaluation of leakage and standby current performance
- Evaluation of product failure diagnosis

- Resolver Sensor
- It is a reliability device to measure the characteristics of a resolver per temperature. It aims to check the characteristics of a resolver in a specified environment and angle state.
- - Precision measurement (RPM Mode)
- Transformation ratio measurement
- Phase difference measurement
- Input/output impedance measurement
- Input/output DC resistance measurement
- Insulation resistance measurement
- Measurement of internal pressure in insulation
- Precision measurement (Step Mode)